Question

In a PVT report, which phase behavior condition is identified when the reservoir temperature is higher than the cricondentherm of the fluid mixture?

Accepted Answer

When the reservoir temperature is higher than the cricondentherm of a fluid mixture, the fluid is identified as a dry gas. The cricondentherm is the maximum temperature at which a liquid and vapor phase can coexist in equilibrium. If the reservoir temperature exceeds this specific point, the fluid mixture remains entirely in the gaseous phase regardless of the pressure changes that occur during production. Because the temperature is above the phase envelope, the fluid will not condense into liquid within the reservoir or the wellbore, which is why it is termed a dry gas. In a standard pressure-temperature phase diagram, the phase envelope represents the boundary where gas and liquid coexist; since the reservoir temperature is outside and above this boundary, the fluid lacks the thermal conditions necessary to form any liquid condensate.

Home → All Courses → Engineering and Technology Courses → Petroleum Geology, Hydrocarbon Exploration and Production, and Reservoir Evaluation → Flashcard

In a PVT report, which phase behavior condition is identified when the reservoir temperature is higher than the cricondentherm of the fluid mixture?

When the reservoir temperature is higher than the cricondentherm of a fluid mixture, the fluid is identified as a dry gas. The cricondentherm is the maximum temperature at which a liquid and vapor phase can coexist in equilibrium. If the reservoir temper....